
JTAG-Booster for IBM PPC405
2.3.
Verify a Flash Device with file
Usage:
JT405xxx /V filename [optionlist]
The contents of a flash device is compared with the specified file. If there are
differences the memory is dumped to a file with the extension DMP.
The type of flash device is normally detected by the software. When autodetect
fails you should use the /DEVICE= option together with /8BIT or /16BIT or
/32BIT to set the right flash device and configuration. The known devices are
shown in chapter 1.10 “Supported flash devices”.
Options:
/DEVICE=devicename
See function /P (Chapter 2.1)
/8BIT /16BIT /32BIT
See function /P (Chapter 2.1)
/BYTE-MODE
See function /P (Chapter 2.1)
/NOMAN
See function /P (Chapter 2.1)
/DEVICE-BASE=hhhhhh
See function /P (Chapter 2.1)
/OFFSET=hhhhhh
See function /P (Chapter 2.1)
/TOP
See function /P (Chapter 2.1)
/FILE-OFFSET=hhhhhh
See function /P (Chapter 2.1)
40
JTAG_PPC405a.doc